STB2 Tháp 2 đèn trạng thái Xenon và LED Tower E2S Vietnam
Xuất sứ: UK
Nhà cung cấp: STC Vietnam
Hãng sản xuất: E2S Warning Signals VietNam
Ứng dụng sản phẩm: Heavy Inductrial, Marine Hàng Hải, Oil and Gas
Hotline
0859200531
2-11-010
STB2 Xenon & LED Tower
The STB2 is a customisable visual signal featuring a tower of 2 AlertAlight L101 type beacons.
Each beacon position can contain either a Xenon or high output L.E.D. light source. The STB2 assembly features a pre-wired junction box and cable loom enabling the end user to determine beacon type and position during installation.
Specification
| General: | |
| Cable entries: | 2 x M20 clearance |
| Ingress Protection: | IP66 |
| Housing material: | UL94V0 & 5VA FR ABS |
| Housing colour: | RAL3000 Red, RAL7038 Grey and White |
| Lens material: | PC |
| Fixings: | Stainless Steel |
| Operating temp: | -25° to +55°C [-13° to +131°F] |
| Storage temp: | -40° to +70°C [-40° to +158°F] |
| Relative humidity: | 90% at 20°C [68°F] |
| STB2 Weight: | 0.65kg/1.43Ibs |
| L101X - Xenon: | |
| Energy: | 5 Joules (5Ws) |
| Flash rate: | 1Hz (60 fpm) |
| Peak Candela: | 500,000 cd - calculated from energy (J) |
| Effective Intensity cd: | 250 cd - calculated from energy (J) |
| Peak Candela: | 86,935 cd* - measured ref. to I.E.S. |
| Effective Intensity cd: | 200 cd* - measured ref. to I.E.S. |
| Terminals: | 0.5 to 4.0mm² cables. |
| Lens colours: | Amber, Blue, Clear, Green, Opal, Red, Yellow |
| Tube life: | Emissions are reduced to 70% after 8 million flashes |
| L101H - L.E.D: | |
| Light source: | High intensity L.E.D. array. 24 x Superflux type high ouput L.E.D’s |
| Options: | Steady or 2Hz flash mode (on board selection) |
| Peak/Effective Intensity cd: | Green L.E.D: 176cd - measured ref. to I.E.S. |
| Terminals: | 0.5 to 4.0mm² cables |
| L.E.D. colours: | Amber Blue, Green, Red and White |
| Lens colour: | All L.E.D. colours use a Clear lens to maximise output and to ensure the signal is most effective in high ambient light levels. |
Part Codes
| Version: | Description: | Voltage: | Part code: | |
|---|---|---|---|---|
| STB2 | Junction box assembly for 2 x L101 beacons |
12/24Vdc | STB2DC[x] | |
| STB2 | Junction box assembly for 2 x L101 beacons |
115/230Vac | STB2AC[x] | |
| [x]: G=Grey, R=Red, W=White | ||||
| Version: | Description: | Voltage: | Part code: | |
| ST-L101X | L101 Xenon Beacon 5J | 12Vdc | ST-L101XDC012[x] | |
| ST-L101X | L101 Xenon Beacon 5J | 24Vdc | ST-L101XDC024[x] | |
| ST-L101X | L101 Xenon Beacon 5J | 115Vac | ST-L101XAC115[x] | |
| ST-L101X | L101 Xenon Beacon 5J | 230Vac | ST-L101XAC230[x] | |
| [x]: A=Amber, B=Blue, C=Clear, G=Green, M=Magenta, R=Red, Y=Yellow | ||||
| ST-L101H | L101 L.E.D. Beacon | 10-30Vdc | ST-L101HDC030[y] | |
| ST-L101H | L101 L.E.D. Beacon | 90-260Vac | ST-L101HAC230[y] | |
| [y]: A=Amber, B=Blue, C=Clear, G=Green, R=Red | ||||
| Example: For a tower of three beacons using two Xenon beacons, one red, one amber plus one L.E.D. beacon in green using a 24Vdc supply in a red housing, order the following part codes: |
||||
| STB3DCR ST-L101XDC024R ST-L101XDC024A ST-L101HDC024G |
||||
| For UL approved version suffix all relevant part codes with '-UL' | ||||
L101H L.E.D. Beacon
| Version: | Voltage: | Current: | |
|---|---|---|---|
| DC | 10-30V dc | 155mA (24V dc) | |
| AC/DC | 50/60Hz | 90-260V ac/dc | 35mA (230V ac) |
L101X Xenon Beacon
| Version: | Voltage: | Current: | |
|---|---|---|---|
| 12V dc/ac | 10-14V | 500mA/380mA | |
| 24V dc/ac | 20-28V | 250mA/300mA | |
| 115V ac | 50/60Hz | +/-10% | 70mA |
| 230V ac | 50/60Hz | +/-10% | 35mA |
