The GNExCP6B manual call points are available as break glass, push button or tool reset versions. They are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems.
All types are available with EOL or series resistors, diode or Zener diodes or an LED indicator and also with either single or double pole change over switches. All versions are certified to ATEX and IECEx standards..
II 2G Ex d e mb IIC T4 Gb
II 2D Ex t IIIC T80°C Db
Ta = -40°C to +50°C/+55°C [-40° to +122°F/+131°F
GRP - glass reinforced polyester
RAL3000 Red (others available on request)
2 x M20 clearance top and
1 x M20 clearance side.
Back box can be rotated to give
2 x bottom and 1 x side entries.
2 x Ex e nylon plugs as standard
Brass and stainless steel plugs optional
6 x 4.0mm² / 8 x 2.5mm²
For applications that do not require monitoring
resistors, diodes or inidcator LED’s please see
the GNExCP6A-PB version.
Data sheet reference: 1.3.05.
The GNExCP6B call point can contain a maximum of two resistor or diode E.O.L. or series modules. The LED indicator can be combined with an EOL resistor or diode.